Moisture in the air is provided by our plume spray nozzles finer than Mist, using mains water pressure. Sprays are usually positioned at high level in the greenhouse to spray into a gangway.The transformer provides safe low voltage for the Humidistat Controller. This can be mounted in the greenhouse and is wired using low voltage cable.The solenoid is triggered by the Humidistat when the humidity is below that set. Setable from 30 to 95% RH. The Solenoid Valve is supplied with Tap Adaptor which connects to a threaded hose tap or one of our Manifolds.Pre-wired 3 mtrs of cable to Transformer, Humidistat and Mounting Bracket. Solenoid Valve, 2 Plume Spray Nozzles and 4 mtrs Hose, Clips and Adaptor.
Automates existing systems.Low Voltage Humidistat with Solenoid Valve OR 240v Relay for Humidifiers.
For Humidification or Evaporative CoolingProduces a cross between Mist and Fog, using mains water pressure. Some particles fall to the ground and evaporate naturally. Many are so small that they evaporate before reaching the floor and are burnt off directly increasing humidity. One nozzle per 6ft x 8ft greenhouse. Comes with 2mtrs of 5mm H.P. hose, Tee and 5 Hose Clips.
Our Burst Timer provides a short burst of spray followed by a wait period. Both spray and wait times are setable from 1 second to many hours. Added to our Plume sprays this reduces wetting and improves control.
Per Metre
Unit 2" diameter provides humidification to a Wardian Case or Terrarium but also produces a lovely swirling mist effect amongst a "group" of plants in the house or greenhouse or when placed in a water feature. Plug in Transformer 1.5mtr lead.
