Manufacturers of Controls, Accessories and Equipment
for the Amateur and Professional Grower since 1982

Electrical Control Products

The greenhouse should be wired by an electrician with the cable sized correctly dependent on the distance and the load and the Residual Current Device (RCD) fitted.

Simply Controls Board

A varnished exterior Plywood panel 19" x 24" provides a neat mounting for greenhouse controls and electrics. Clever, slotted aluminium brackets and bolt pack enable it to be easily mounted between aluminium or timber glazing bars, that are from 22" to 30" apart.

Quantity

@ £29.95

Sockets & Housing

Takes 2 Plug In Timers & 2 Plugs
A safer way to provide power for controls, propagators, lights, plug in timers etc: enables plugs to be splash resistant and out of the way even when unplugged. Aluminium case, removeable clear plastic front panel, four square pin outlets, neon indicator, fuse & switch. Total Max load 13amps 16" x 7.5" x 5"

Quantity

@ £42.00

R.C.D 25Amp

If a fault occurs the supply is shut off, giving protection from eletrocution. A 30 milliamp trip in a splashproof box. Size 74 x 135 x 95mm

Quantity

@ £69.95

R.C.D 40Amp

If a fault occurs the supply is shut off, giving protection from eletrocution. A 30 milliamp trip in a splashproof box. Size 74 x 135 x 95mm

Quantity

@ £69.95

Hoseproof Socket

A clever rubber seal enables a standard square pin plug to be waterproof to IP56 when plugged in and the lid closed.

Quantity

@ £35.95

Shopping Basket:

Our Products:

Manufacturers of Controls, Accessories and Equipment
for the Amateur and Professional Grower since 1982

Electrical Control Products

Shopping Basket:

Our Products:

Manufacturers of Controls, Accessories and Equipmentfor the Amateur and Professional Grower since 1982

Electrical Control Products

Manufacturers of Controls, Accessories and Equipment
for the Amateur and Professional Grower since 1982